Compact 1/2" Condenser Microphone with Detachable Capsule (head)
The RØDE NT6 is specifically designed for difficult mounting applications. Although clearly relevant to instrument miking, the new NT6 is extremely well suited to any situation where a small 'unobtrusive' but powerful microphone system is required.
The 1/2" (externally biased) gold sputtered capsule is designed to attach to a custom made, multi-position swivel mount allowing it to be independently positioned with ease. The capsule is connected to the remote pre-amplifier (body) by a custom 3m Kevlar® fibre reinforced cable.
The surface-mount pre-amplifier circuit also incorporates a two position variable pad: 0 dB and -10 dB attenuation, and a 2-position variable high-pass filter that enables you to step from a flat response to 80Hz high pass filter; both conveniently located away from the capsule, providing additional control without the need to move the capsule once in position.
Externally biased condenser
Gold sputtered 1/2" capsule
Two position PAD - 0dB and -10dB
Two position High-Pass Filter - flat and 80Hz
Convenient two-axis swivel mount and 3m Kevlar® fibre reinforced cable included
Heavy-duty satin-nickel plated body
Surface mount circuitry
Low noise and full frequency response
Power
P48 (48V), P24 (24V) phantom supply
Acoustic Principle
Pressure gradient
Directional Pattern
Cardioid
Frequency range
40Hz-20kHz, selectable HPF @ 80Hz/12dB/octave
Output impedance
200Ω
Signal noise ratio
75 dB SPL (A - weighted per IEC651)
Equivalent noise
19 dB SPL (A - weighted per IEC651)
Maximum SPL
135dB SPL (@ 1kHz, 1% THD into 1KΩ load) (145dB with maximum PAD)
Maximum output voltage
+6dBu (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity
-37 dB re 1 Volt/Pascal (16 mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Weight
386gm
Dimensions
188.4mmH x 64mmW x 20mmD
Reviews
"I have to say that this is another accomplished offering from the Australian manufacturer... sonically it's hard to find fault with this microphone. The combination of diminuitive design smarts, reliability and sonic integrity will no doubt see this microphone become a popular choice in a wide variety of roles." - Audio Technology
"This microphone has plenty of top-end airiness, but it doesn't sound at all harsh. What's more, it goes very deep... The NT6 retains its even and neutral response throughout the frequency range." - MusicTech Magazine
Included Accessories
Custom swivel mount, ZP1 zip pouch and WS5 windshield
Optional Accessories
GN1 gooseneck, NT45-O Omni capsule, DS1 desk stand and Tripod
)
)
)
)
)
)
)
)
